RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Removal
5.9L/6.7L DIESEL
ECT LOCATION - 6.7L DIESEL
WARNING: Hot, pressurized coolant can cause injury by scalding. Cooling system must be partially drained before removing the coolant
temperature sensor.
1. Partially drain the cooling system.
ECT LOCATION - 5.9L DIESEL
2. Remove heat shield (if equipped).
3. Disconnect the electrical connector (2) from the ETC sensor (3).
4. Remove the ETC sensor from the cylinder head.
