RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Stabilizer Link: Service and Repair
Front - Link/Coil
Stabilizer Link
STABILIZER LINK
1. Raise and support the vehicle.
2. Hold the stabilizer link (5) shafts with a wrench and remove the link nuts at the stabilizer bar (3).
3. Remove the retainers (1) and grommets (2) from the stabilizer bar links (5).
4. Remove the stabilizer bar link nuts from the axle brackets.
5. Remove the links (2) from the axle brackets with Puller C-3894-A (1).
Stabilizer Link With Disconnecting Stabilizer Bar
STABILIZER LINK WITH DISCONNECTING STABILIZER BAR
