RAM 3500 HD Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
1. Raise and support the vehicle.
2. Hold the stabilizer link (1) shafts with a wrench and remove the link nuts (3) at the stabilizer bar (2).
3. Remove the stabilizer bar link nuts from the axle brackets (2).
4. Remove the links (1) from the axle brackets (2) with Puller 9360 (3).
Stabilizer Link
STABILIZER LINK
1. Install links (5) to the axle bracket (4) and tighten nut to 149 Nm (110 ft. lbs.).
2. Install links (5), retainers (1), grommets (2) and nuts to the stabilizer bar. Hold the link shaft with a wrench and tighten the nuts to 38 Nm (27 ft.
lbs.).
3. Remove the supports and lower the vehicle.
