RAM 3500 Van V8-360 5.9L Magnum (1995)
2.
Remove seat adjuster (release handle side) from seat track by removing 2 mounting bolts from cushion frame and disconnecting the release wire.
Figure 2
3.
Install new adjuster by torquing the 2 mounting bolts 22.4N.m (200 in.lbs ) to the cushion frame and reconnecting release wire.
4.
Install the seat assembly by referring to page 23-66 of the Ram Van/Wagon Service Manual.
5.
Repeat above steps on other seat if necessary.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No: 23-13-35-90
One Seat
0.3 Hrs.
23-13-35-91
Both Seats
0.6 Hrs.
FAILURE CODE: P8 - New Part