RAM 3500 Van V8-360 5.9L Magnum (1995)
Engine Mount: Service and Repair
Rear Mount
1. Raise and support vehicle, then position transmission jack beneath transmission and raise rear of engine/transmission assembly slightly.
2. Remove rear mount through-bolt and nut.
3. Remove U-shaped bracket, then separate insulator from bracket.
4. Remove rear engine support from transmission extension housing.
5. Reverse procedure to install, noting the following:
a. Torque bracket bolts and through bolt to 50 ft-lbs. Torque U-shaped bracket bolts and U-shaped bracket insulator bolt to 30 ft-lbs