RAM 3500 Van V8-360 5.9L Magnum (1995)
Power Steering Pump: Service and Repair
Power Steering Pump Removal and Installation
1. Loosen pump locking and attaching bolts, then remove serpentine drive belt as outlined under "Serpentine Drive Belt" in "Gasoline Engines"
section.
2. Disconnect both fluid hoses from pump.
3. It may be necessary to remove pump pulley from pump to access pump mounting bolts. Use pulley remover No. C-4333, or equivalent to remove
pulley.
4. Remove pump locking and attaching bolts, then remove pump and bracket assembly.
5. Reverse procedure to install.
