RAM 3500 Van V8-360 5.9L Magnum (1995)
Stabilizer Bar: Service and Repair
1. Raise and support vehicle, then remove nut and washer from stabilizer bar link bolt at lower suspension arm on both sides of vehicle.
2. Remove link bolt, retainers, insulators and spacers from each lower suspension arm, then remove bolts from U-shaped retainer.
3. Remove retainer and stabilizer bar from vehicle.
4. Reverse procedure to install, noting the following:
a. Align stabilizer bar bushings before installing bar on bracket.
b. Torque anchor bolt nuts to 8.5 ft-lbs. and U-shaped retainer bolts to 16.5 ft-lbs.
