RAM 3500 Van V8-360 5.9L VIN 5 Magnum (1998)
Brake Master Cylinder: Service and Repair
Master Cylinder Replacement
REMOVAL
Master Cylinder
1. Remove brake lines from master cylinder.
2. Remove master cylinder mounting nuts.
3. Remove master cylinder from mounting studs.
INSTALLATION
NOTE: If master cylinder is replaced, bench bleed before installation.
1. Position master cylinder on mounting studs.
2. Install mounting nuts and tighten to 23 Nm (17 ft. lbs.).
3. Install brake lines and tighten to 16 Nm (145 inch lbs.).
4. Bleed brake system.