RAM 3500 Van V8-360 5.9L VIN 5 Magnum (1998)
5. Position servo assembly to body and install 2 bolts. Tighten bolts to 8.5 N.m (75 in. lbs.) torque.
6. Connect vacuum line at servo.
7. Connect electrical connector at servo.
8. Connect servo cable to throttle body. Refer to Servo Cable Replacement.
9. Before starting engine, operate accelerator pedal to check for any binding.
10. Install engine cover.
11. Install air cleaner housing.
12. Connect negative battery cable to battery.