RAM 3500 Van V8-360 5.9L VIN 5 Magnum (1998)
Rear Overhead Outlet Bezels
1. Using a trim stick or another suitable wide flat-bladed tool, gently pry around the perimeter edges of the outlet bezel to release it from the
overhead duct outlet.
2. Remove the overhead outlet bezel from the rear headliner.
3. To install the outlet bezel, position the bezel in the outlet opening of the rear overhead duct and press inward firmly and evenly on both sides
of the bezel until it snaps into place.
Rear Side Panel Outlet Bezels
Rear side panel outlet bezels are only used on models equipped with the optional rear heater-A/C unit.
Rear Side Panel Outlet Bezels
1. Using a trim stick or another suitable wide flat-bladed tool, gently pry between the edge of the outlet bezel and the rear side panel lower trim
panel to release the snap clips that secure the bezel to the horizontal duct.
2. Remove the outlet bezel from the rear side panel lower trim panel.
3. To install the outlet bezel, position the bezel to the holes on the horizontal duct and press inward firmly and evenly on both sides of the bezel
until the retaining clips snap into place.
Vertical Duct
The vertical duct is only used on models equipped with the optional rear heater-A/C unit.
