RAM 3500 Van V8-360 5.9L VIN 5 Magnum (1998)
Lock Cylinder Switch: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the trim panel from the inside of the front door.
Door Lock Cylinder Switch Remove/Install
3. Unplug the door lock cylinder switch wire harness connector.
4. Disengage the door lock cylinder switch from the back of the front door lock cylinder
5. Disengage the retainers that secure the door lock cylinder switch wire harness to the inner door panel.
6. Remove the door lock cylinder switch from the door.
7. Reverse the removal procedures to install.
