RAM 3500 Van V8-5.2L CNG VIN T (1996)
Rear Door Handle: Service and Repair
DUAL CARGO DOOR OUTSIDE HANDLE REMOVAL
1. Open the cargo doors.
2. Remove the trim panel from the right door.
Door Handles & Latch - Right Cargo Door
Power Door Latch - Right Cargo Door
3. Disconnect the outside handle latch rod from the latch lever.
4. Remove the nuts that attach the handle to the door panel. Remove the handle from the door.
INSTALLATION
1. Position the handle on the door panel with the handle latch rod inserted ill the opening. Insert the handle studs into the panel holes.
2. Attach the handle latch rod to the latch lever.
3. Install the nuts that attach the handle to the door panel. Tighten the nuts to 7 Nm (65 in. lbs.) torque.
4. Install the door trim panel.
