RAM 3500 Van V8-5.2L CNG VIN T (1996)
Sliding Door Handle: Service and Repair
Interior Door Handle
Sliding Cargo Door Handles
SLIDING CARGO DOOR INSIDE HANDLE REMOVAL
NOTE: The inside door handle is attached to the outside handle with an Allen (hex-head) screw.
1. Remove the inside handle screw from the outside handle shaft.
2. Remove the handle and spacers from the outside handle shaft.
INSTALLATION
1. Position the spacers and the inside handle on the outside handle shaft. Verify that both spacers are installed.
2. Install the inside handle screw in the outside handle shaft. Tighten the screw to 5 Nm (40 in. lbs.) torque.