RAM 3500 Van V8-5.2L CNG VIN T (1996)
CAUTION: Adhesive may be holding cylinder carrier to bottom of vehicle floorpan. With hydraulic jack still in position, carefully pry carrier
from floorpan with a wide blade screwdriver.
Installing Components To Parallel Position
CAUTION: Before removing cylinder from cylinder carrier, note and mark cylinder position in relation to cylinder carrier. This must be done in
order to install fuel control valve back to its original position. Both cylinder support straps must be also be installed back to their original
horizontal parallel position to prevent distortion of vehicle floorpan.
Left Side Cylinder Carrier Bolts/nuts
15. Remove carrier support-to-fuel cylinder strap nuts/bolts.
16. Remove cylinder from carrier.
INSTALLATION
1. Position cylinder to carrier.
Installing Components To Parallel Position
