RAM 3500 Van V8-5.2L CNG VIN T (1996)
Camshaft Position Sensor: Description and Operation
Helpful Information
CIRCUIT OPERATION
The Powertrain Control Module (PCM) supplies 5 Volts to the camshaft position sensor on circuit K6. Circuit K6 connects to cavity A17 of the
PCM.
The PCM receives the camshaft position sensor signal on circuit K44. Circuit K44 connects to cavity A18 of the PCM.
The PCM provides a ground for the camshaft position sensor (circuit K44) through circuit K4. Circuit K4 connects to cavity A4 of the PCM
connector.
