RAM 3500 Van V8-5.2L CNG VIN T (1996)
Shoulder Belt Buckle & Lap Belts/Buckles
5. Raise the seat skirt and remove the shoulder belt buckle anchor bolt from the seat frame.
6. Separate the shoulder belt buckle from the lap belt buckle and the seat frame.
7. Remove the shoulder belt and buckle from the vehicle.
INSTALLATION
1. Position the upper end of the quick-disconnect assembly on the shoulder bolt at the body upper side panel.
2. Slide the assembly downward and lock into place.
3. Position the front belt lower anchor plate, rear belt, anchor and cover at the seat frame.
4. Install the anchor bolt in the seat platform. Tighten the bolt to 40 Nm (350 in. lbs.) torque.
5. Position the shoulder belt buckle at the seat frame. Mate it with the lap belt buckle. Align the anchor bolt holes.
6. Install the anchor bolt in the seat frame. Tighten the bolt to 40 Nm (350 in. lbs.) torque.
