RAM 3500 Van V8-5.2L CNG VIN T (1996)
Owner Notification and Service Scheduling
All involved vehicle owners known to Chrysler are being notified of the service requirement by first class mail. They are requested to install the enclosed
label themselves or if preferred to schedule appointments for dealer installation. A copy of the owner notification letter is included.
Enclosed with each owner notification is an Owner Notification Form. The involved vehicle and four digit recall number (6751 or 6752) are identified
on the form for owner or dealer reference as needed.
Completion Reporting and Reimbursement
Claims for vehicles which have been serviced must be submitted on the DIAL System. Claims submitted will be used by Chrysler to record recall service
completions and provide dealer payments.
Use the following labor operation number and time allowance:
Labor Operation
Time
Number
Allowance
Install tire/rim information
23675182
0.2 hours
correction label
Note:
See Warranty Policy and Procedure Manual, Chapter 6, Subsection H for complete recall claim processing instructions.
Parts Return: Not applicable.
Vehicle Not Available
If a vehicle is not available for service for a known reason, let us know by filling out the pre-addressed Vehicle Disposition Form portion of the Owner
Notification Form or describe the reason on a postcard and mail to:
Chrysler Corporation
CIMS 482-00-85
800 Chrysler Drive East
Auburn Hills, Michigan 48326-2757
Following the above procedures will expedite the processing of your claim.
If you have any questions or need assistance in completing this action, please contact your Zone Service Office.
Service Procedure
Owners may request dealer installation of the tire/rim information correction label. The following steps apply:
1.
Locate the Vehicle Certification Label, on the driver's door body pillar (B-post) as shown in the illustration.
2.
Clean the existing label by wiping it with a household cleaner to remove any oil or grease. Be sure the label is clean and dry.