dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Recall - Power Seat Riser|Page 6442 > < Power Seat Switch|Description and Operation|Page 6433
Page 1
background image

Technical Service Bulletin # 781

Date: 980501

Recall - Power Seat Riser

No. 781

May, 1998

To: All Dodge Truck Dealers

Subject:
Safety Recall # 781 -- Power Seat Riser

Models:
1998 Model Year Dodge Ram (AB) Vans and Wagons Equipped With a Power Driver's Seat (Sales Code CDG or JPS) Built Through March 2, 1998
(MDH 030213)

The power driver's seat riser on about 3,600 of the above listed vehicles, may have inadequate front crossmember spot welds. A seat riser with
inadequate welds may allow the front crossmember to separate from the riser under certain accident conditions. To correct this condition, the power
driver's seat riser must be replaced.

IMPORTANT

Some of the involved vehicles may be in dealer new vehicle inventory. Federal law requires you to complete this recall service on these vehicles
before retail delivery. Dealers should also consider this requirement to apply to used vehicle inventory, and should perform this recall on vehicles in
for service as determined by using the DIAL VIP System.

Dealer Notification & Vehicle List

All dealers will receive a copy of this dealer recall notification letter by first class mail. Each dealer to whom involved vehicles were invoiced (or the
current dealer at the same street address) will receive a list of their involved vehicles. The Vehicle List is arranged in Vehicle Identification Number
(VIN) sequence. Owners known to Chrysler are also listed. The lists are for dealer reference in arranging for service of involved vehicles.

DIAL System Functions 53 and VIP

All involved vehicles will be entered to DIAL System Functions 53 and VIP at the time of recall implementation for dealer inquiry as needed.

Function 53 provides involved dealers with an updated VIN list of incomplete vehicles. The customer name, address and phone number is listed if
known. Parts information is also provided. Completed vehicles are removed from Function 53 within several days of repair claim submission. To use this
system, type "53" at the "ENTER FUNCTION" prompt, then type "ORD781".

Parts

IMPORTANT: 

A quantity of parts will be distributed initially and billed to all involved dealers. This quantity will cover a portion of the total vehicles involved.
Additional parts may be ordered as needed to support customer demand.

Each involved dealer, to whom vehicles in the recall were invoiced (or the current dealer at the same street address), will receive enough Seat Risers to
service about 50% of those vehicles.

Dealers should determine which part is required for each vehicle at the time appointments are scheduled to assure that the correct part is available when
the customer arrives. The appropriate seat riser for the vehicle to be serviced may be determined by:

^

Using the part code in the third column of the VIN list along with the table shown (involved dealers):

^

Using the VIN and part number list electronically transmitted to DIAL System Function 53 (involved dealers) or

^

Entering the VIN to the DIAL VIP System (sales code information) along with the table shown (all dealers).

Owner Notification and Service Scheduling

Recall - Power Seat Riser|Page 6442 > < Power Seat Switch|Description and Operation|Page 6433