RAM 3500 Van V8-5.9L VIN Z LDC (1998)
Coolant Reservoir: Service and Repair
REMOVAL
1. Disconnect the battery negative cable.
2. Remove the windshield washer reservoir.
3. Remove overflow hose at reserve/overflow tank.
Coolant Recovery Bottle-Removal/Installation
4. Remove the two bolts at top of tank and remove tank. A slot is located on the radiator support panel (sheet metal) to support the lower part of tank.
Slip tank from this slot.
INSTALLATION
1. Slip the tank into the slot on radiator support.
2. Install bolts and tighten to 6 Nm (50 inch lbs.) torque.
3. Install overflow hose to tank.
4. Install the windshield washer reservoir.
5. Connect the battery negative cable.
