RAM 3500 Van V8-5.9L VIN Z LDC (1998)
5.
Remove the bushings from the stabilizer bar.
6.
Install the bushings onto the new stabilizer bar p/n 52039336AC.
7.
Position the new stabilizer bar p/n 52039336AC onto the frame rails.
NOTE:
ENSURE THE STABILIZER BAR IS CENTERED WITH EQUAL SPACING ON BOTH SIDES.
8.
Install stabilizer retainers and bolts. Tighten the bolts to 23 Nm (200 in. lbs.).
9.
Install the link bolts, retainers, spacers, and insulators onto the stabilizer bar and onto the strut bar.
10.
Install the link bolt nuts. Tighten the nuts to 11 N.m (100 in. lbs.).
11.
Remove the support and lower the vehicle.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
02-20-01-91
0.4 Hrs.
FAILURE CODE: P8 - New Part
