RAM 4500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
Brake Pad: Service and Repair
Brake Pads - Removal
Rear
REAR
1. Raise and support the vehicle.
2. Remove the rear wheel and tire assemblies.
3. Compress the caliper.
4. Remove caliper slide bolts (3).
NOTE: Do not allow brake hose to support caliper assembly.
5. Remove the caliper (3), See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper - Removal and then tilt the top up
and off the caliper adapter.