RAM 4500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
5. Install the support bracket bolts (3) and tighten to 50 Nm (37 ft. lbs.) torque.
6. Torque the bracket to transmission nuts (11) to 30 Nm (22 ft. lbs.) torque.
7. Using the transmission jack, lower the transmission and support cushion (5) onto the crossmember.
8. Install the support cushion nuts (6) and tighten to 61 Nm (45 ft. lbs.) torque.