RAM 4500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
17. Install the crankshaft damper See: Cylinder Block Assembly/Harmonic Balancer - Crankshaft Pulley/Service and Repair/Removal and
Replacement/Vibration Damper - Installation . Torque bolts to 40 Nm (30 ft. lbs.), plus an additional 60°.
18. Install the lower fan shroud bracket. Torque bolts to 24 Nm (18 ft. lbs.) torque.
19. Install the upper fan shroud brackets. Hand tighten only.
20. Lower vehicle.
21. Install the fan support/hub assembly and tighten bolts to 32 Nm (24 ft. lbs.) torque.
22. Install the power steering pump.
23. Install the accessory drive belt tensioner. Torque bolt to 43 Nm (32 ft. lbs.) torque.
24. Install the accessory drive belt See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Removal and
Replacement/Accessory Drive Belt - Installation .
25. Install the upper cooling fan/drive/shroud assembly.
26. Torque the upper fan shroud brackets to 24 Nm (18 ft. lbs.) torque.
27. Connect the coolant recovery bottle hose to the radiator filler neck.
28. Install the radiator upper hose and clamps.
29. Add engine oil.
30. Add coolant See: Cooling System/Service and Repair .
31. Connect the battery cables.
32. Start engine and inspect for leaks.
