RAM 4500 Chassis Cab Truck 4WD L6-6.7L DSL Turbo (2011)
2. Remove the door panel grab handle bezel (Figure 17).
CAUTION:
DO NOT attempt to unscrew the two ornamental allen head screws on the grab handle bezel. The bezel has two retaining clips that hold the bezel
to the grab handle
3. Remove the two door panel retaining screws located under the grab handle bezel.
4. Remove the inside door handle bezel.
5. Remove the door panel upper and lower retaining screws.
6. Unsnap the door panel from the door and set aside.
7. Knock out the access hole plugs in the carrier plate (Figure 18).
8. Raise the window so that the window release tabs line up with the knock out holes in the carrier plate.
9. Unsnap the window glass from the window regulator and slide the glass all the way up. Then use tape to hold the glass in place.
