RAM 50 4WD L4-143 2.3L DSL Turbo VIN J FI (1983)
FIGURE 1 - IDLE-UP ADJUSTING (F.I.D.C.)
2.
Make sure curb idle speed is within the specified speed and reset it by readjusting the speed adjusting screw (SAS 1) if necessary (refer to Group
0) - Figure 1.
3.
Switch the air conditioning ON.
4.
Adjust the engine speed to the specified speed with the throttle opener setting screw (SAS 2).
5.
Turn the air conditioner switch ON/OFF several times to check the throttle opener for operation (lever up/down).
Specification
Idle-Up Speed for Setting Throttle Opener
Description
Specified Speed RPM
Engine Speed
875 + or - 25 rpm
POLICY:
Information only