RAM 50 4WD L4-143 2.3L DSL Turbo VIN J FI (1983)
Fig. 38 Injection nozzle & fuel return lines
INSTALLATION
1.
Clean nozzle mounting area of cylinder head.
2.
Install a replacement nozzle tip gasket.
3.
Install injection nozzle on cylinder head and torque using tool No. MD998387 to 44 to 50 ft. lbs.
4.
Connect return line, Fig. 38 and fuel injection line to nozzle using a spanner wrench to hold nozzle in position while tightening line nut. Torque
fuel return line nuts to 33-39 ft. lbs. Torque fuel injection line nuts to 17-26 ft. lbs.
