RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
Rear Door Panel: Service and Repair
Rear Door Trim Panel - Removal
REMOVAL
1. Remove the screw (3) that secures the interior door handle (2) to the interior door handle actuator (1).
2. Remove the interior door handle from the interior door handle actuator.
3. If equipped, remove the manual window crank (2) using a window crank removal tool (1).
4. Remove the screw (4) that secures the door trim panel (5) to the screw insert located in the center of the door (1).
CAUTION: The door trim panel is attached to the door by molded plastic retaining clips that are integral to the door trim panel. Do not
pull the door trim panel directly off of the door or damage to the trim panel and/or the power switch assembly will occur.
5. Lift the door trim panel straight upward to disconnect the molded plastic retaining clips (3) from the door.
