RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
11. Apply brakes several times to seat caliper pistons and brake shoes and obtain firm pedal.
12. Top off master cylinder fluid level.
4500 & 5500
4500 & 5500
1. Bottom pistons in caliper bore with C-clamp. Place an old brake shoe between a C-clamp and caliper piston.
2. Clean caliper mounting adapter (2) and anti-rattle springs.
3. Lubricate anti-rattle springs with Mopar brake grease.
NOTE: Anti-rattle springs are not interchangeable.
4. Install new anti-rattle springs.
5. Install the brake pads (3) in adapter (2).
6. Install caliper (1), See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper - Installation .
7. Install wheel and tire assemblies and lower vehicle, See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement .
8. Apply brakes several times to seat caliper pistons and brake shoes and obtain firm pedal.
9. Top off master cylinder fluid level.