RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
caution may result in damage to the vehicle.
1. If removed, position the brackets to the transmission. Install attaching fasteners (1,2), Do not tighten at this time..
2. Position support cushion (5) to transmission support bracket (3). Install stud nuts (4) and tighten to 61 Nm (45 ft. lbs.) torque.
3. Position assembled support cushion (5) and bracket (3) to transmission.
4. Install the support bracket bolt (7) and tighten to 54 Nm (40 ft. lbs.) torque.