RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
Exhaust Pipe: Service and Repair
Tailpipe
Removal
DIESEL
1. Disconnect the battery negative cables.
2. Raise and support the vehicle.
3. Saturate the clamp nuts with heat valve lubricant. Allow 5 minutes for penetration.
4. Disconnect the exhaust tailpipe support hanger isolators.
5. Remove the muffler-to-tailpipe clamps.
6. Remove the tailpipe from the vehicle.
Inspection
INSPECTION
Discard rusted clamps, broken or worn supports and attaching parts. Replace a component with original equipment parts, or equivalent. This will assure
proper alignment with other parts in the system and provide acceptable exhaust noise levels.
Installation
DIESEL