RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
Evaporator Temperature Sensor / Switch: Service and Repair
Installation
INSTALLATION
NOTE: Illustration shown with instrument panel removed for clarity.
1. Install the evaporator temperature sensor (2) into the opening in the top of the HVAC housing (3). Make sure the sensor is fully engage to the
housing.
2. Connect the HVAC wire harness (1) to the evaporator temperature sensor.
3. Install the glove box See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Instrument Panel Glove Box -
Installation .
4. Reconnect the negative battery cable.