RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
Oil Change Reminder Lamp: Service and Repair
OIL CHANGE INDICATOR - RESET
To reset the "Oil Change Required" indicator (after performing the scheduled maintenance) refer to the following procedure:
-
1. Turn the ignition switch to the ON position (Do not start engine).
-
2. Fully depress the accelerator pedal slowly three times within 10 seconds.
-
3. Turn the ignition switch to the OFF/LOCK position.
NOTE: If the "Oil Change Required" indicator message illuminates when you start the vehicle, the indicator did not reset. If necessary repeat
this procedure.