RAM 5500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2008)
4. Remove timing valve cover.
5. Remove 3-4 timing valve and spring.
6. Remove 3-4 quick fill valve, spring and plug.
7. Remove 3-4 shift valve and spring.
8. Remove converter clutch valve, spring and plug.
9. Remove converter clutch timing valve, retainer and valve spring.
Assembly
ASSEMBLY
CAUTION: Do not force valves or plugs into place during reassembly. If the valve body bores, valves and plugs are free of distortion or burrs,
the valve body components should all slide into place easily. In addition, do not overtighten the transfer plate and valve body screws during
reassembly. Overtightening can distort the housings resulting in valve sticking, cross leakage and unsatisfactory operation. Tighten valve body
screws to recommended tightening specifications only.
LOWER HOUSING
Lower Housing Shift Valves and Springs
