RAM 5500 Chassis Cab Truck 4WD L6-6.7L DSL Turbo (2011)
10. Remove the access panel on the lower "B" pillar to gain access to the door-to-body electrical connector (Figure 19).
11. Unplug the door wiring electrical connector from the body wiring harness located inside the "B" pillar trim panel.
12. Unhook the door check strap from the body hook.
13. Remove the door check strap anchor from the door (Figure 19).
14. Disconnect the mirror electrical connector from the door wiring harness.
15. Remove and save the three door latch retaining screws (Figure 20).
