RAM 5500 Chassis Cab Truck 4WD L6-6.7L DSL Turbo (2011)
2. Remove the door panel grab handle bezel (Figure 11).
CAUTION:
DO NOT attempt to unscrew the two ornamental allen head screws on the grab handle bezel. The bezel has two retaining clips that hold the bezel
to the grab handle.
3. Remove the two door panel retaining screws located under the grab handle bezel.
4. Remove the inside door handle bezel (Figure 11).
5. Remove the door panel lower screws. ACCESS HOLE PLUGS
6. Remove the power door lock switch (Figure 11).
7. Unsnap the door panel from the door and set aside.
8. Knock out the access hole plugs in the carrier plate (Figure 12).
9. Raise the window so that the release tabs line up with the knock out holes.
