Ram Raider L4-2555cc 2.6L SOHC (1987)
INSTALLATION STEP 11. INSTALLATION OF CHAIN "B"
(1) Holding assembled sprockets and chain "B", align timing mark on crankshaft sprocket "B" with that on chain "B", and install sprockets to oil
pump drive gear and left silent shaft. Partially tighten bolt.
INSTALLATION STEP 7. INSTALLATION OF OIL SEAL
Using special tool, install the oil seal.
INSTALLATION STEP 3. INSTALLATION OF TIMING CHAIN CASE
(1) Clean the gasket surfaces of chain case and cylinder block.
(2) Install the chain case gaskets and chain case to the cylinder block.
