Ram Raider L4-2555cc 2.6L SOHC (1987)
Fig. 19 Tilt wheel steering column exploded view. Front wheel drive
5.
Remove tilt lever and turn signal or speed control lever.
6.
Push hazard warning knob and remove by unscrewing, then remove ignition key lamp, if used.
7.
If not removed previously, remove steering wheel using a suitable puller. Do not attempt to remove steering wheel using a hammer, as damage
to steering column and shaft will result.
Fig. 20 Lock plate retaining ring removal
8.
Carefully remove plastic cover from lock plate, then depress lock plate and pry retaining ring out of groove with a screwdriver. Tool No. C-4156
can be used to depress lock plate, however, it will make removal of retaining ring more difficult, since the full load of the retaining plate will not
