Ram Raider V6-2972cc 3.0L SOHC (1989)
3. Apply the specified sealant around the gasket surface of oil pan as specified in illustration.
Specified sealant: MITSUBISHI GENUINE PART MZ1OO16B or equivalent.
NOTE: The sealant should be applied in a continuous bead approximately 4 mm (0.16 in) in diameter.
4. Assemble oil pan to cylinder block within 15 minutes after applying the sealant.
Caution:
1. Tighten the oil pan mounting bolt in the order illustrated (left).
2. After installing the oil pan, wait at least 30 minutes before starting the engine.
5. Lower the vehicle; then attach a chain to the engine hanger, and, using a chain block, raise the engine.
Caution: Be careful, when raising the engine, that it does not strike and bend tubes or pipes.
6. Remove the spacer between the engine mounting front insulator and the mount, and lower the engine.
