dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

EVAP Canister - Hard Restart After A Hot Soak|Page 1430 > < Canister Purge Solenoid|Locations|Page 1421
Page 1
background image

Evaporative Emission Control Canister: Customer Interest
EVAP Canister - Hard Restart After A Hot Soak

Models

1988 & 1989 PB/B4 and SJ/B6 Bodies Equipped With 2.0L and 2.6L Engines

Subject

Hard Start After Hot Soak in High Ambient Temperatures

Index

DRIVEABILITY

Date

April 17, 1989

No.

18-06-89

P-1516 (C18-06-9)
BODY CODE LEGEND

PB/B4 - RAM 50, POWER RAM 50, & D50 PICKUP SJ/B6 - RAIDER

SYMPTOM/CONDITION

Vehicle is hard to restart after hot soak at high ambient temperatures.

DIAGNOSIS

Verify condition by driving the vehicle until the engine is fully warm. Shut off engine. Remove air cleaner assembly, and look into throttle bore. If
condition is present, a puddling of fuel will be seen at bottom of intake bore, and the throttle plate will appear to be wet with fuel.

PARTS REQUIRED

1988/1989 PB/B4 (Ram 50) Vehicles

1 Charcoal Canister

P/N MB554504

1988/1989 SJ/B6 (Ram Raider) Vehicles

1 Charcoal Canister

P/N MB554503

FIGURE 1

EVAP Canister - Hard Restart After A Hot Soak|Page 1430 > < Canister Purge Solenoid|Locations|Page 1421