Ram Raider V6-2972cc 3.0L SOHC (1989)
Power Door Lock Control Module: Testing and Inspection
1. Apply battery voltage to the terminal 1 and ground the terminal 6.
2. Verify that the terminal voltage indicated at the terminals 2 and 3 is 12V.
3. Verity that by grounding the terminal 4 or 5 the voltage at the terminal 3 momentarily drops to 0V (about 0.5 second), and then rises back to 12V.
4. Verify that by removing the ground from the terminal 4 or 5 in the state as described in 3., the voltage at the terminal 2 momentarily drops to 0V
(about 0.5 second), and then rises back to 12V.
