Ram Raider V6-2972cc 3.0L SOHC (1989)
Seat Belt: Service and Repair
Rear Seat Belts
REMOVAL STEPS
1. Retractor cover
2. Rear seat belt assembly
SERVICE POINTS OF INSTALLATION
2. Installation Of Rear Seat Belt Assembly
a. Position the anchor plates at the center of the vehicle so that the belts are parallel to the vehicle center line, and then secure the plates with the
bolts.
b. Fit the anchor plate anti-turning pin positively in the body side hole and jointly tighten the retractor and anchor plate.
NOTE: After tightening the bolts, securely mount the anchor covers for the inner end of the seat belts.
CAUTION: Special bolts (1-in. bolts) are used for the seat belt mounting bolts.