Ram Raider V6-2972cc 3.0L SOHC (1989)
Inhibitor Switch: Testing and Inspection
Inhibitor Switch (A/T)
Disassembly Of The Gear Select Lever
Checking The Sensor Continuity
1.
With the gear select lever in the PARK position, verify continuity between terminals # 3 and # 4.
2.
Shift the gear select lever to REVERSE, verify continuity between terminals # 1 and # 2.
3.
Shift the gear select lever to NEUTRAL, verify continuity between terminals # 3 and # 4.
If continuity is measured at any other position than instructed, replace the Inhibitor Switch.
Refer the COMPONENT REPLACEMENT AND REPAIR PROCEDURES.