Ram Raider V6-2972cc 3.0L SOHC (1989)
Windshield Wiper Transmission: Service and Repair
1.
Remove wiper motor as outlined under WIPER AND WASHER.
2. Position wiper motor shaft at right angles to the linkage and remove linkage while holding shaft.
3. Reverse procedure to install, noting the following:
a.
Ensure shaft bracket positioning boss is properly located in access hole.
b.
Mount wiper arm so that when motor is in park position distance between wiper blade and bottom of windshield is 0.6-1 inch on both sides
for Ram 50 and 1.5-1.9 inch on both sides for Ram Raider.
