RAM SRT-10 Pickup V10-505 8.3L (2004)
1. Position the door latch (3) into the door (1).
2. Install the three bolts (4) that secure the door latch to the door. Tighten the bolts to 10 N.m (89 in.lbs.).
3. Connect the door wire harness connector (2) to the door latch.
4. Connect the actuator rod (3) to the door latch (2) and the interior door handle actuator (5).
5. Reposition the waterdam to the door (1) and install the door trim panel.
6. If necessary, adjust the latch.