RAM SRT-10 Pickup V10-505 8.3L (2004)
Front Door Striker: Service and Repair
LATCH STRIKER
REMOVAL
1. Using a grease pencil or equivalent, mark the location of the door latch striker (1) on the B-pillar (2).
2. Remove the two bolts (3) that secure the door latch striker to the B-pillar and remove the striker.
INSTALLATION
1. Position the door latch striker (1) onto the B-pillar (2) and loosely install the two bolts (3).
2. Align the door latch striker to the B-pillar using the reference marks made during the removal procedure and tighten the bolts to 28 N.m (21
ft.lbs.).
3. If necessary, adjust the door latch striker.