RAM SRT-10 Pickup V10-505 8.3L (2004)
3. Remove the disc brake caliper.
CALIPERS-DISC BRAKE REAR
REMOVAL
CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to hang
the caliper securely.
1. Raise and support vehicle.
2. Remove the wheel and tire assembly.
3. Drain small amount of fluid from master cylinder brake reservoir with suction gun.
4. Remove the brake hose banjo bolt and discard the copper washers if replacing caliper.
5. Remove the caliper slide bolts (3).
6. Remove the caliper (6) from vehicle.
7. Remove the caliper adapter bolts.
8. Remove the rear axle shaft from the housing on dual rear wheels.
9. Remove the hub and rotor assembly (C3500 only).
REAR - SRT-10
