RAM SRT-10 Pickup V10-505 8.3L (2004)
23.
Remove the oil pick up tube (Figure 12).
24.
Remove the left and right motor mount retaining nuts.
25
Temporarily install the oil pan for lifting engine.
26.
Lower the vehicle.
27.
Raise the engine with a floor jack (place wood between the jack and the oil pan).
28.
Remove the crankshaft pulley.
29.
Remove the crankshaft vibration damper using special tool # 1023 (puller) and special tool # 6827-A (insert).
30.
Inspect the mating surfaces of the crankshaft and vibration damper. If there is evidence of the damper slipping on the crankshaft, polish the
crankshaft with emery or crocus cloth and discard the vibration damper.
31.
Remove the oil cooler line from the timing chain cover using special tool #9005 (Figure 13).
32.
Remove the lower radiator hose from the front cover.
33.
Remove the accessory drive belt tensioner.
