RAM SRT-10 Pickup V10-505 8.3L (2004)
Evaporator Core: Description and Operation
The A/C evaporator is located in the HVAC housing, behind the instrument panel. The evaporator is positioned in the HVAC housing so that all air that
enters the housing must pass over the fins of the evaporator coils before it is distributed through the system ducts and outlets. However, air passing over
the evaporator fins will only be conditioned when the compressor is engaged and circulating refrigerant through the evaporator tubes.
Refrigerant enters the A/C evaporator from the fixed orifice tube as a low-temperature, low-pressure mixture of liquid and gas. As air flows over the fins
of the A/C evaporator, the humidity in the air condenses on the fins, and the heat from the air is absorbed by the refrigerant. Heat absorption causes the
refrigerant to boil and vaporize. The refrigerant becomes a low-pressure gas before it leaves the A/C evaporator.
The A/C evaporator cannot be repaired and, if faulty or damaged, it must be replaced.
