RAM SRT-10 Pickup V10-505 8.3L (2004)
Fog/Driving Lamp Bulb: Service and Repair
FOG LAMPS
REMOVAL
NOTE: The fog lamps are serviced from the rearward side of the front bumper.
1. Disconnect and isolate the battery negative cable.
2. Disengage fog lamp harness connector.
3. Remove the bolts attaching the fog lamp to the bumper.
4. Separate fog lamp from bumper.
INSTALLATION
1. Position fog lamp in bumper.
2. Install the bolts attaching the fog lamp to the bumper.
3. Connect fog lamp harness connector.
4. Connect the battery negative cable.
5. Check for proper operation and beam alignment.