RAM SRT-10 Pickup V10-505 8.3L (2004)
3. Align reference marks on propeller shaft (2) and pinion flange or pinion yoke.
4. Install new companion flange (1) bolts and tighten to 15 Nm (85 ft. lbs.)
5. Install new SRT-10 yoke clamp (4) bolts and tighten to 29 Nm (22 ft. lbs.).
NOTE: Companion flange bolts incorporate a Loctite (R) patch, new bolts should be used. If bolts are not available, clean bolts and apply Loctite
(R) 242 to the threads.
